Before requesting a sample
Compare the published specifications with your purchasing and process requirements. This checklist helps procurement, quality and process teams identify missing information before sample evaluation; it does not replace qualification in the intended plating system.
Process scope
This checklist focuses on electronic-grade CuO evaluated as an external copper source for PCB acid-copper plating systems with insoluble anodes. Before testing, confirm the bath chemistry, replenishment equipment, dosing and mixing arrangements, and acceptance criteria.
How copper replenishment works with insoluble anodesElectronic-grade CuO specifications
These are Zhongan Copper’s published specification limits, not measured results for every shipment or universal limits for all PCB plating processes. Compare them with your purchase specification and agreed test methods.
| Parameter | Specification limit |
|---|---|
| CuO | ≥ 99.00% |
| Cl | ≤ 0.0015% |
| Pb | ≤ 0.0005% |
| Na | ≤ 0.0030% |
| Mg | ≤ 0.0010% |
| Mn | ≤ 0.0005% |
| Fe | ≤ 0.0010% |
| Ni | ≤ 0.0010% |
| Zn | ≤ 0.0010% |
| Ca | ≤ 0.0010% |
| Acid-insoluble matter | ≤ 0.003% |
| Acid dissolution time | ≤ 30 s |
Procurement and technical checks
Use the information available here as a starting point, then confirm the requirements for your own project.
Process fit
- Available information
- Product application information and the copper-replenishment explanation.
- Confirm for your project
- Bath chemistry, anode system, replenishment equipment, and dosing and mixing arrangements.
Specifications and test conditions
- Available information
- Product limits, TDS, dissolution information and particle-size documentation.
- Confirm for your project
- Acceptance limits, test methods, units and conditions. Results obtained under different conditions should not be treated as directly comparable.
Batch identification and traceability
- Available information
- Representative COA records.
- Confirm for your project
- Sample and shipment lot identification, the corresponding COA, and required traceability documentation.
Safety and supporting documents
- Available information
- SDS, SGS and other available reports.
- Confirm for your project
- Edition, language, sample scope, destination requirements, and any additional testing or documentation.
Sample and supply arrangements
- Available information
- Packaging details and procurement FAQ.
- Confirm for your project
- Evaluation quantity, expected purchase volume, destination, package labelling and document language.
Technical documents
The Downloads page provides the published TDS, representative COA records, SDS, SGS report and particle-size report. Check each file’s language, date, sample identification and stated scope. If your project requires documents beyond the published set, confirm availability with the technical team before ordering.
Browse technical documentsReports apply to their stated samples and test conditions. Final acceptance is based on the agreed specification, applicable batch documents and qualification requirements for the intended process.
Information to include in your inquiry
Please include the intended application, replenishment system, target specification, evaluation quantity, destination and required document language. Attach your acceptance criteria or test method if available.
Discuss products and samples